Location
Canterbury, NSW
Site
BMW service workshop
Equipment
Maestro 2.35 NxT
Lifting capacity
3.5 tonnes
About the project.
Canterbury BMW services its cars on AUTOPSTENHOJ Maestro 2.35 NxT two-post hoists, with their red lifting arms set out across the workshop’s tiled floor.
The 2.35 NxT is the newer generation of the AUTOPSTENHOJ Maestro, a premium European hoist known for its build quality and reliability, and suited to dealerships and professional workshops. It lifts up to 3.5 tonnes.
Photos.
3 photos. Select one to see it larger and step through the set.
Equipment in detail.
The hoist used in this workshop.
AUTOPSTENHOJ Maestro 2.35 NxT
The newer generation of the AUTOPSTENHOJ Maestro, a premium quality European two-post hoist with a 3.5 tonne lifting capacity. The Maestro range is known for its build quality and reliability, and is suited to dealerships and professional workshops.
Key specifications
| Lifting Capacity | 3500 kg |
| Lifting Height | 1985 mm |
| Lifting/Lowering Time | 30 seconds (approx.) |
| Voltage | 400V 3 Phase 50Hz (three phase only) |
| Drive-through Width | 2400 mm |
| Total Height | 3800 mm |
Installed and looked after by Molnar.
Molnar Services install, service, inspect and repair vehicle hoists across Australia.
01
Installation
Delivery and installation for all our hoists, by trained and qualified installers, with operating and maintenance manuals, a hoist owner’s logbook and a follow-up visit at six weeks.
02
Routine servicing
Managed maintenance programs with scheduled service reminders, genuine parts and technicians working to Australian standards and regulations.
03
Safety inspections
Inspections against Australian standards, with compliant record keeping and logbook maintenance, so your workshop meets its obligations under AS/NZS 2550.9.
04
Breakdown repairs
Agreed response times, genuine Molnar parts and support from a national network of experienced hoist technicians.
Questions.
Something else you need to know? Ask our team.
What is the difference between the Maestro 35F and the 2.35 NxT?
The 2.35 NxT is the newer generation of the Maestro. Both lift 3.5 tonnes. Contact us for the 2.35 NxT’s full specifications.
What power does the Maestro need?
The Maestro 35F runs on 400 V three-phase power. Ask us about the 2.35 NxT.
Who installs and services these hoists?
Molnar Services install, service, inspect and repair vehicle hoists to Australian standards, including other brands that are compliant and design registered in Australia. See our hoist services.
