Select the Right Hoist
Use our product filters to find hoists matched to your workshop. Select your vehicle types, work requirements, and any space or power constraints to see compatible options instantly. Need guidance? Our team is still here to help with complex installations or custom requirements.
-
Asymmetric two post hoist with 4.5 tonne capacity. The asymmetric columns and arms give improved door clearance, and there is no base frame so the floor between the posts stays clear.
-
Electro-hydraulic symmetrical car hoist with 4.5 tonne lifting capacity. This two post vehicle hoist is suitable for vehicle repair and maintenance.
-
Molnar CM255-A is a 2 post symmetrical car hoist suitable for vehicle repair and maintenance. Can lift cars and vans up to 5.5 tonne.
-
Molnar SM270 is a heavy duty 2 post universal car hoist with 7000kg lifting capacity, suitable for large vehicles and commercial workshops.
-
Fully hot-dip galvanised 4.5 tonne two post hoist built for wash bay and outdoor use. Lifts most cars and small vans from a 95mm pad height. Three phase supply required.
-
AUTOPSTENHOJ Maestro 35F is a premium European 2 post hoist with 3.5 tonne capacity.
-
40SE is a 2 post electro hydraulic hoist with 4 tonne lifting capacity.
-
Mobile mid-rise scissor hoist lifting 3.5 tonne to 1000mm from a 105mm profile. Supplied with a roller and handle kit so it can be repositioned between bays.
-
Lifts to 2030mm from a platform just 110mm high, so low vehicles drive straight on and you keep clear access to both sides. Surface mounted with no excavation, available in three phase or single phase, and backed by a 3 year warranty.
-
5.5 tonne wheel alignment platform scissor hoist for wheel alignment and service work.
-
Doubles parking in the same footprint, lifting 3,000kg with 2,140mm of clearance below. Installs above ground with no pit, and can share a column with adjacent units to fit more into limited space.
-
The LASER-4.3 CP is a 3-car stacking parking system that triples your parking capacity. Ideal for commercial buildings, apartment complexes, and space-constrained locations. It is a dependent system, so the space below must be clear before the platform above can be raised or lowered.
-
4 tonne 4 post wheel alignment hoist with integrated slip plates.
-
4 tonne 4 post service hoist for home, industrial or commercial workshops.
-
5 tonne 4 post wheel alignment hoist with integrated slip plates.
-
6 tonne four post wheel alignment hoist for passenger cars to light commercial vehicles.
-
Molnar CM240B+ is a solid 4 tonne electro hydraulic two post hoist with a solid H-type baseframe. Suitable for cars and vans up to 4 tonne capacity (excluding LWB).
-
6 tonne four post service hoist for passenger cars to light commercial vehicles.
Filter by vehicle, work type, and workshop constraints to find the right hoist.
Choosing the Right Hoist
Select your vehicle types, the work you do, and any workshop constraints using the filters above. The product list updates instantly so you can compare only compatible hoists.
Pre-Install Checklist
Make sure your workshop is ready before you purchase. Our pre-install checklist covers ceiling height, floor condition, power supply, vehicle clearance, and installation access.
Need Help Choosing?
If the filters don’t cover your situation, our team can help. With over 30 years of manufacturing and installing hoists across Australia, we can recommend the right setup for any workshop.