CM245-A – 2 Post Symmetrical Car Hoist 4.5tonne
Description
The Molnar CM245-A two post car hoist is a symmetrical 4.5 tonne electro-hydraulic two post vehicle hoist available with 3 phase or optional single phase motor power.
This hoist is suitable for vehicle repair and maintenance within industrial, commercial, and even domestic workshops.
The double telescopic arm length makes the CM245-A hoist one of the most versatile on the market, suitable for the smallest of cars through to large SUVs.
For more information on 2 post car hoists, please complete the contact form below or call our customer service team.
Key Features
- Clear floor (no base frame)
- Unique single post symmetric column design for greater stability
- Single hydraulic unit
- Carriage with slide blocks
- Push button control unit with upper protection limit
- Park button and direct down functionality
- Mechanical synchronisation
- Safety rachet system (no expensive compression air required)
- Automatic arm locking system
- Low minimum height
- Double telescopic front and rear arms
- 105° arm swing; eases pad positioning
- Suitable for small passenger cars through to SUVs
- 3 year warranty
Specification
| Lifting Capacity: | 4500 kg |
| Lifting Height: | 1990 mm |
| Working Height: | 90 mm – 1990 mm |
| Lifting/Lowering Time: | 30 seconds (approx.) |
| Motor Unit: | 3 kW |
| Voltage: |
3 Phase 50 Hz 7 Amps
1 Phase 50 Hz 20 Amps
|
| Minimum Height: | 90 mm |
| Drive-through width: | 2484 mm |
| Total Width – outer edges base plates: | 3434 mm |
| Total Height – including post: | 4050 mm |
| Arm length front, minimum – maximum: | 600 – 1250 mm |
| Arm length rear, minimum – maximum: | 600 – 1250 mm |
Images
Frequently Asked Questions about 2 Post Symmetric 4.5t car Hoist
placeholder
What is the difference between a clear floor 2 post hoist and a standard 2 post hoist?
The advantage of a “clear floor” model is the way it allows you to move jacks and equipment conveniently through the middle area of the hoist. This design makes it easier for you to carry out gearbox or transmission replacement and other major maintenance.
The “clear floor” 2 post hoist allows you to move jacks and equipment easily through the middle area of the hoist – offering you a seamless experience when conducting major maintenance, such as gearbox or transmission replacement. With this design, you’ll have all the expertise you need to get the job done right.
Is it ok to leave a car up on a 2 post hoist for an extended period of time?
You can definitely leave your car on a two post hoist for an extended period of time – so long as the safety locks are properly engaged and the car isn’t resting on the hydraulics. Still, it’s important to remember that cars are not made to stay lifted off their wheels for prolonged periods of time, so you should confirm with your vehicle’s manufacturer if you’re uncertain.
Symmetrical vs Asymmetrical car hoist
No matter your automotive needs, when it comes to car hoists, there are two main types: symmetrical and asymmetrical. Both hoists provide the same service – elevating a vehicle off the ground so mechanics can easily access them without having to crawl on the ground, but they have distinct differences in design and functionality. (mainly column post or arm configuration)
Symmetrical hoists evenly distribute the weight to the front and rear of the car or truck by squarely positioning the vehicle at the centre of the hoist. On the other hand, Asymmetric lifting allows for vehicles to be positioned slightly further back making it easy to open the doors to access inside the vehicle. This is especially practical if you raise and lower a large number of vehicles every day and want to get in and out quickly.
A Symmetric vehicle hoist is only better than an asymmetrical hoist if the vehicle has a longer wheelbase and is heavier in the rear. If these conditions don’t apply, then it’s best to use an asymmetric car lift. Contact us to discuss your options further.
Where should I place my car on an asymmetric hoist?
To ensure a safe and secure lift, move your vehicle forward until 30% is situated in front of the columns. Make sure all the lift pads are facing towards the back end of the car. When you have it set up correctly, pull out the arms and place each pad on its designated lifting point.
Get in Touch
get in touch
Contact Details
MOLNAR (STENHØJ Pty Ltd)
Unit 3, 34 Bennet Ave
Melrose Park, SA 5039
Australia
Molnar by Nexion
We Are Everywhere
